type: HELI
MERAK E750 EVO NEW F3C HELI!MK75200
2021-06-26   ViewCount :  

MERAK E750 EVO NEW F3C HELI!MK75200(图1)

The production standard of body metal parts is strict and high precision.

The new Zoomlion design enhances the following degree and wind resistance of the body.

The pitch control pull rod adopts titanium alloy positive and negative tooth adjustable pull rod with high strength and accurate pitch.

The newly designed swashplate is supported by two thin-walled bearings, and the side is equipped with a locking structure, which can adjust and control the virtual position of the swashplate at any time.

The main gear and tail transmission gear adopt helical teeth with a slope of 20 degrees, which makes the bite more smooth, has obvious mute effect and increases the service life of the gear.

The diameter of the tail sliding sleeve is increased, the wall thickness is increased, the fracture prevention is also more wear-resistant.

The tail rudder control rod adopts 4mm carbon fiber rod to increase control accuracy and reduce resonance, which is reliable and durable.

The design of adjustable rocker arm and double push connecting rod makes the adjustment of tilt plate easy, reduces the control virtual position and reduces the wear of steering gear.

All aluminum alloy lightweight tripod, high strength and good toughness!

The third generation of integrated adhesive side plate structure supports battery stacking and one-way installation, and there are 5 installation positions to choose, which are used to adjust the center of gravity position of the body and obtain different flight characteristics.

The lightweight metal parts of the whole machine have a take-off weight of only 5.3kg(Including body).

Standard metal mounting base of tripod is provided to increase the torsional performance and support force of lower side plate.

The main gear seat and one-way bearing seat are integrated, and the diameter of the gear seat is increased, so the gear concentricity is higher and more durable.

The center seat of the tail transmission gear is enlarged to increase the support force of the tail gear.

Metal motor fixing base mounting plate.

Upgrade the 20t synchronous belt drive wheel.

The new tail wave box assembly and tail rotor clamp, and the tail fork adopts double push slider structure to bring higher control accuracy..

Design of receiver mounting plate with adjustable mounting angle.



MERAK E750 EVO NEW F3C HELI!MK75200(图2)

MERAK E750 EVO NEW F3C HELI!MK75200(图3)

MERAK E750 EVO NEW F3C HELI!MK75200(图4)

MERAK E750 EVO NEW F3C HELI!MK75200(图5)

MERAK E750 EVO NEW F3C HELI!MK75200(图6)

MERAK E750 EVO NEW F3C HELI!MK75200(图7)

MERAK E750 EVO NEW F3C HELI!MK75200(图8)

MERAK E750 EVO NEW F3C HELI!MK75200(图9)

MERAK E750 EVO NEW F3C HELI!MK75200(图10)

MERAK E750 EVO NEW F3C HELI!MK75200(图11)


type:HELI